Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it is fairly easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However, if you have double glazing window repairs pane windows that are secured by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this situation you'll need to source some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

If you are going to attempt to remove the glass window repair (Read More Listed here) panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, Glass Window Repair as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sagging. A sagging window can cause problems with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows to access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close your window and do an experiment to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's important to take action. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the problem the old caulking may need to be removed before a fresh layer is applied. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window more difficult to clean and decrease its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with ease It could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is an easy procedure, but it is easier with someone else to assist in holding the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue can be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give assistance.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges may also become disaligned as a result of wear, creating a gap where the sash and frame meet. If they're beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it's possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are usually fabric tubes that are filled with some kind of filler. They can be positioned on the windowsill on top. They can keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a life span and Glass Window Repair eventually, they will reach the point when it's more economical to replace them than repair them. If you have any problems with your upvc window, it's best to consult an expert as soon as possible.