10 Things Everyone Hates About Repairs To Upvc Windows Repairs To Upvc…

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. However, if you have double pane windows that are held in place by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance, you will need to find some plastic spacers to assist the new pane to fit properly into the window frame.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap between the window and the door is substantial, you may prefer an alarm system that has windows. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, with time, they are susceptible to a range of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need open the window replacement to access the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen up. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and perform a test fit. The corners of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer can be applied. When it is time to uPVC repair, you should be careful not to over-caulk. This can make your window harder to clean and lower its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal than the frame. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with a breeze. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. Changing a window hinge is essentially a simple process but it can be easier to do if you have someone to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us a photo through our website can often resolve the problem. We are happy to offer suggestions.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also reduce the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges can also be unbalanced due to wear, causing an opening where the sash and frame meet. This can be easily fixed by giving them a good clean, but if they are beyond repair it may be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it is possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be put on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it is more cost-effective to simply replace them rather than repair them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.