20 Things You Need To Be Educated About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However, if you have double pane windows that are secured by internal beading, it will be more difficult to remove the old panes and put in new ones. In this situation, you will need to find some plastic spacers that assist the new pane to fit properly into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not onto the floor and could be trampled under.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap is particularly large, you may be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

To fix a sagging window you can try to reposition the hinges. To accomplish this, sash you'll need to open the window to access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it could also be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and floors that are wet. Windows that leak water do are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may have to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window repair. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with an ease. They can be replaced by any competent DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It's very simple to change the hinges on a window however it is easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a picture via our website will often solve the issue. We are happy to provide advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. The ideal time to do this once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges may also become unbalanced due to wear, causing a gap where the sash and frame meet. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a life span and they may reach the point when it's more efficient to replace them than fix them. If you encounter any issues with your upvc window it is recommended to speak with a professional immediately.