17 Reasons You Shouldn't Avoid Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. However If windows with double panes are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance, you will need to locate some plastic spacers that assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the cloth instead of landing on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is significant, you may want to use an alarm system that has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of problems including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. It is crucial to act when you notice your upvc repairs near me windows are sliding.

Repositioning the hinges could aid in fixing a window replacement that is sliding. First, you'll need to unblock the windows to get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and verify the fit. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to shut the window and do an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal than the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier with someone else to assist in holding the frame up.

Check that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also due to wear and tear can become misaligned, this can cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it is feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach an point at which it is more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.