Repairs To Upvc Windows It's Not As Hard As You Think

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need to source some plastic spacers that will help the new pane to fit correctly into the window frame.

If you are going to attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap between the window and the door is large, you might need to consider security screens that has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they may be afflicted by a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and test it for fit. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window repair waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. First, you'll need close your window and do a test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to take action if awake each day to discover mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. When it is time to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process, but it's easier to do when you have a person to assist in holding the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. You can do this by checking for the arrows on each hinge, this indicates which way the window repairs near me should open.

window repair hinges that aren't working properly could be the result of incorrectly opening the window a certain way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you advice.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It also decreases the risk of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges, also due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. If they are beyond repair, it may be necessary to get them re-aligned. Second, the interlock can also become disaligned. This is located on the hinge's side and may need to be cleaned. In some instances it might be necessary to replace the hinges.

The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc windows will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it is cheaper to replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult a professional as soon as you can.