10 Websites To Help You Be A Pro In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace, uPVC window repairs and they generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A window that is sagging can cause problems with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows so you can reach the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is important to act if you get up each morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking used previously may need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double glazed window repair-glazed glass it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze it could be hinges at fault. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they can wear down over time. It is very easy to change a window hinge however it is easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us a picture through our website can often solve the issue. We are always happy to provide suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes a gap to form where the sash meets the frame. These can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it is possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next most common reason for draughts is window seals. They are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking cold air.

Your upvc window repair windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to realize that all windows have a life span and there may come a point where it is more efficient to replace them than fix them. If you have any problems with your Upvc window you should consult an expert as soon as you can.