Repairs To Upvc Windows: 11 Things That You're Failing To Do

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap between the window and the door is substantial, you may want to use security screens that has windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need open the window to access the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the size of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and floors that are wet. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk can be put on. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazing near me glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in the breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like any mechanical part hinges will wear out over time. It is an easy process, but it's simpler when you have a person to help you hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of improper installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to offer advice.

It is also important to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges can also become unbalanced due to wear, which can cause gaps between the frame and sash. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge's side and might require to be cleaned. In certain instances it might be necessary to replace the hinges.

The second most frequent reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, timber and let air escape through the gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to recognize that all windows have a life span and timber there may come the point when it's more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.